# SIP Default Generic Configuration File # Image Version image_version: P0S3-08-11-00 # Proxy Server proxy1_address: YOURCOMPANYNAME.hosted.surevoip.co.uk ; See details provided to you on signup proxy2_address: YOURCOMPANYNAME.hosted.surevoip.co.uk ; Can be dotted IP or FQDN proxy3_address: "" ; Can be dotted IP or FQDN proxy4_address: "" ; Can be dotted IP or FQDN proxy5_address: "" ; Can be dotted IP or FQDN proxy6_address: "" ; Can be dotted IP or FQDN # Proxy Server Port (default - 5060) proxy1_port: 5060 proxy2_port: 5060 proxy3_port: 5060 proxy4_port: 5060 proxy5_port: 5060 proxy6_port: 5060 # Proxy Registration (0-disable (default), 1-enable) proxy_register: 1 # Phone Registration Expiration [1-3932100 sec] (Default - 3600) timer_register_expires: 3600 # Codec for media stream (g711ulaw (default), g711alaw, g729a) preferred_codec: g711alaw # TOS bits in media stream [0-5] (Default - 5) tos_media: 5 # Inband DTMF Settings (0-disable, 1-enable (default)) dtmf_inband: 0 # Out of band DTMF Settings (none-disable, avt-avt enable (default), avt_always - always avt ) dtmf_outofband: avt_always # DTMF dB Level Settings (1-6dB down, 2-3db down, 3-nominal (default), 4-3db up, 5-6dB up) dtmf_db_level: 3 # SIP Timers timer_t1: 500 ; Default 500 msec timer_t2: 4000 ; Default 4 sec sip_retx: 10 ; Default 10 sip_invite_retx: 6 ; Default 6 timer_invite_expires: 180 ; Default 180 sec ####### New Parameters added in Release 2.0 ####### # Dialplan template (.xml format file relative to the TFTP root directory) dial_template: dialplan # TFTP Phone Specific Configuration File Directory tftp_cfg_dir: "" ; Example: ./sip_phone/ # Time Server (There are multiple values and configurations refer to Admin Guide for Specifics) sntp_server: "0.uk.ntp.org" ; SNTP Server IP Address sntp_mode: unicast ; unicast, multicast, anycast, or directedbroadcast (default) time_zone: GMT ; Time Zone Phone is in dst_offset: 01/00 ; Offset from Phone's time when DST is in effect dst_start_month: March ; Month in which DST starts dst_start_day: 0 ; Day of month in which DST starts dst_start_day_of_week: Sunday ; Day of week in which DST starts dst_start_week_of_month: 8 ; Week of month in which DST starts dst_start_time: 02/00 ; Time of day in which DST starts dst_stop_month: October ; Month in which DST stops dst_stop_day: 0 ; Day of month in which DST stops dst_stop_day_of_week: Sunday ; Day of week in which DST stops dst_stop_week_of_month: 8 ; Week of month in which DST stops 8=last week of month dst_stop_time: 02/00 ; Time of day in which DST stops dst_auto_adjust: 1 ; Enable(1-Default)/Disable(0) DST automatic adjustment time_format_24hr: 1 ; Enable(1 - 24Hr Default)/Disable(0 - 12Hr) date_format: M/D/Y # Do Not Disturb Control (0-off, 1-on, 2-off with no user control, 3-on with no user control) dnd_control: 2 ; Default 0 (Do Not Disturb feature is off) # Caller ID Blocking (0-disbaled, 1-enabled, 2-disabled no user control, 3-enabled no user control) callerid_blocking: 0 ; Default 0 (Disable sending all calls as anonymous) # Anonymous Call Blocking (0-disabled, 1-enabled, 2-disabled no user control, 3-enabled no user control) anonymous_call_block: 0 ; Default 0 (Disable blocking of anonymous calls) # DTMF AVT Payload (Dynamic payload range for AVT tones - 96-127) dtmf_avt_payload: 101 ; Default 101 # Sync value of the phone used for remote reset sync: 1 ; Default 1 ####### New Parameters added in Release 2.1 ####### # Backup Proxy Support proxy_backup: "" ; Dotted IP of Backup Proxy proxy_backup_port: 5060 ; Backup Proxy port (default is 5060) # Emergency Proxy Support proxy_emergency: "" ; Dotted IP of Emergency Proxy proxy_emergency_port: 5060 ; Emergency Proxy port (default is 5060) # Configurable VAD option enable_vad: 0 ; VAD setting 0-disable (Default), 1-enable ####### New Parameters added in Release 2.2 ###### # NAT/Firewall Traversal nat_enable: 0 ; 0-Disabled (default), 1-Enabled nat_address: "" ; WAN IP address of NAT box (dotted IP or DNS A record only) voip_control_port: 5060 ; UDP port used for SIP messages (default - 5060) start_media_port: 16384 ; Start RTP range for media (default - 16384) end_media_port: 32766 ; End RTP range for media (default - 32766) nat_received_processing: 0 ; 0-Disabled (default), 1-Enabled # Outbound Proxy Support outbound_proxy: "" ; restricted to dotted IP or DNS A record only outbound_proxy_port: 5060 ; default is 5060 ####### New Parameter added in Release 3.0 ####### # Allow for the bridge on a 3way call to join remaining parties upon hangup cnf_join_enable : 0 ; 0-Disabled, 1-Enabled (default) ####### New Parameters added in Release 3.1 ####### # Allow Transfer to be completed while target phone is still ringing semi_attended_transfer: 1 ; 0-Disabled, 1-Enabled (default) # Telnet Level (enable or disable the ability to telnet into the phone) telnet_level: 0 ; 0-Disabled (default), 1-Enabled, 2-Privileged ####### New Parameters added in Release 4.0 ####### # XML URLs services_url: "" ; URL for external Phone Services directory_url: "http://kjv.homeip.net/cisco/dir.xml" ; URL for external Directory location logo_url: "" ; URL for branding logo to be used on phone display # HTTP Proxy Support http_proxy_addr: "" ; Address of HTTP Proxy server http_proxy_port: 80 ; Port of HTTP Proxy Server (80-default) # Dynamic DNS/TFTP Support dyn_dns_addr_1: "" ; restricted to dotted IP dyn_dns_addr_2: "" ; restricted to dotted IP dyn_tftp_addr: "" ; restricted to dotted IP # Remote Party ID remote_party_id: 1 ; 0-Disabled (default), 1-Enabled ####### New Parameters added in Release 4.4 ####### # Call Hold Ringback (0-disabled, 1-enabled, 2-disabled no user control, 3-enabled no user control) call_hold_ringback: 3 ; Default 0 (Disable ringback of held call) auto_answer: 32 autocomplete: 0 dnd_control: 2