{{tag>Setup Cisco_Unified_IP_7900_Series Configuration}}
====== How to Set Up the Cisco Unified IP Phone 7900 Series ======
This guide is relevant to the Cisco 7940 and Cisco 7960 Series IP Phones.
:!: Please note: We are unable to provide support for these phones. If you require assistance please contact your supplier for support.
Use of the example configuration files below is entirely at your own risk.
If you use the below examples, please be sure to modify the usernames, passwords, proxy names etc as appropriate.
You will need to put these into a TFTP server ,and enable "Option 66" or TFTP Address on DHCP for this to succeed.
SIPDefault.cnf
# SIP Default Generic Configuration File
# Image Version
image_version: P0S3-08-11-00
# Proxy Server
proxy1_address: YOURCOMPANYNAME.hosted.surevoip.co.uk ; See details provided to you on signup
proxy2_address: YOURCOMPANYNAME.hosted.surevoip.co.uk ; Can be dotted IP or FQDN
proxy3_address: "" ; Can be dotted IP or FQDN
proxy4_address: "" ; Can be dotted IP or FQDN
proxy5_address: "" ; Can be dotted IP or FQDN
proxy6_address: "" ; Can be dotted IP or FQDN
# Proxy Server Port (default - 5060)
proxy1_port: 5060
proxy2_port: 5060
proxy3_port: 5060
proxy4_port: 5060
proxy5_port: 5060
proxy6_port: 5060
# Proxy Registration (0-disable (default), 1-enable)
proxy_register: 1
# Phone Registration Expiration [1-3932100 sec] (Default - 3600)
timer_register_expires: 3600
# Codec for media stream (g711ulaw (default), g711alaw, g729a)
preferred_codec: g711alaw
# TOS bits in media stream [0-5] (Default - 5)
tos_media: 5
# Inband DTMF Settings (0-disable, 1-enable (default))
dtmf_inband: 0
# Out of band DTMF Settings (none-disable, avt-avt enable (default), avt_always - always avt )
dtmf_outofband: avt_always
# DTMF dB Level Settings (1-6dB down, 2-3db down, 3-nominal (default), 4-3db up, 5-6dB up)
dtmf_db_level: 3
# SIP Timers
timer_t1: 500 ; Default 500 msec
timer_t2: 4000 ; Default 4 sec
sip_retx: 10 ; Default 10
sip_invite_retx: 6 ; Default 6
timer_invite_expires: 180 ; Default 180 sec
####### New Parameters added in Release 2.0 #######
# Dialplan template (.xml format file relative to the TFTP root directory)
dial_template: dialplan
# TFTP Phone Specific Configuration File Directory
tftp_cfg_dir: "" ; Example: ./sip_phone/
# Time Server (There are multiple values and configurations refer to Admin Guide for Specifics)
sntp_server: "0.uk.ntp.org" ; SNTP Server IP Address
sntp_mode: unicast ; unicast, multicast, anycast, or directedbroadcast (default)
time_zone: GMT ; Time Zone Phone is in
dst_offset: 01/00 ; Offset from Phone's time when DST is in effect
dst_start_month: March ; Month in which DST starts
dst_start_day: 0 ; Day of month in which DST starts
dst_start_day_of_week: Sunday ; Day of week in which DST starts
dst_start_week_of_month: 8 ; Week of month in which DST starts
dst_start_time: 02/00 ; Time of day in which DST starts
dst_stop_month: October ; Month in which DST stops
dst_stop_day: 0 ; Day of month in which DST stops
dst_stop_day_of_week: Sunday ; Day of week in which DST stops
dst_stop_week_of_month: 8 ; Week of month in which DST stops 8=last week of month
dst_stop_time: 02/00 ; Time of day in which DST stops
dst_auto_adjust: 1 ; Enable(1-Default)/Disable(0) DST automatic adjustment
time_format_24hr: 1 ; Enable(1 - 24Hr Default)/Disable(0 - 12Hr)
date_format: M/D/Y
# Do Not Disturb Control (0-off, 1-on, 2-off with no user control, 3-on with no user control)
dnd_control: 2 ; Default 0 (Do Not Disturb feature is off)
# Caller ID Blocking (0-disbaled, 1-enabled, 2-disabled no user control, 3-enabled no user control)
callerid_blocking: 0 ; Default 0 (Disable sending all calls as anonymous)
# Anonymous Call Blocking (0-disabled, 1-enabled, 2-disabled no user control, 3-enabled no user control)
anonymous_call_block: 0 ; Default 0 (Disable blocking of anonymous calls)
# DTMF AVT Payload (Dynamic payload range for AVT tones - 96-127)
dtmf_avt_payload: 101 ; Default 101
# Sync value of the phone used for remote reset
sync: 1 ; Default 1
####### New Parameters added in Release 2.1 #######
# Backup Proxy Support
proxy_backup: "" ; Dotted IP of Backup Proxy
proxy_backup_port: 5060 ; Backup Proxy port (default is 5060)
# Emergency Proxy Support
proxy_emergency: "" ; Dotted IP of Emergency Proxy
proxy_emergency_port: 5060 ; Emergency Proxy port (default is 5060)
# Configurable VAD option
enable_vad: 0 ; VAD setting 0-disable (Default), 1-enable
####### New Parameters added in Release 2.2 ######
# NAT/Firewall Traversal
nat_enable: 0 ; 0-Disabled (default), 1-Enabled
nat_address: "" ; WAN IP address of NAT box (dotted IP or DNS A record only)
voip_control_port: 5060 ; UDP port used for SIP messages (default - 5060)
start_media_port: 16384 ; Start RTP range for media (default - 16384)
end_media_port: 32766 ; End RTP range for media (default - 32766)
nat_received_processing: 0 ; 0-Disabled (default), 1-Enabled
# Outbound Proxy Support
outbound_proxy: "" ; restricted to dotted IP or DNS A record only
outbound_proxy_port: 5060 ; default is 5060
####### New Parameter added in Release 3.0 #######
# Allow for the bridge on a 3way call to join remaining parties upon hangup
cnf_join_enable : 0 ; 0-Disabled, 1-Enabled (default)
####### New Parameters added in Release 3.1 #######
# Allow Transfer to be completed while target phone is still ringing
semi_attended_transfer: 1 ; 0-Disabled, 1-Enabled (default)
# Telnet Level (enable or disable the ability to telnet into the phone)
telnet_level: 0 ; 0-Disabled (default), 1-Enabled, 2-Privileged
####### New Parameters added in Release 4.0 #######
# XML URLs
services_url: "" ; URL for external Phone Services
directory_url: "http://kjv.homeip.net/cisco/dir.xml" ; URL for external Directory location
logo_url: "" ; URL for branding logo to be used on phone display
# HTTP Proxy Support
http_proxy_addr: "" ; Address of HTTP Proxy server
http_proxy_port: 80 ; Port of HTTP Proxy Server (80-default)
# Dynamic DNS/TFTP Support
dyn_dns_addr_1: "" ; restricted to dotted IP
dyn_dns_addr_2: "" ; restricted to dotted IP
dyn_tftp_addr: "" ; restricted to dotted IP
# Remote Party ID
remote_party_id: 1 ; 0-Disabled (default), 1-Enabled
####### New Parameters added in Release 4.4 #######
# Call Hold Ringback (0-disabled, 1-enabled, 2-disabled no user control, 3-enabled no user control)
call_hold_ringback: 3 ; Default 0 (Disable ringback of held call)
auto_answer: 32
autocomplete: 0
dnd_control: 2
Rename the MAC file to your phone's MAC address. What is in the MAC file over-rides the SIPDefault file.
SIP00MAC.cnf
# SIP Configuration Generic File (start)
# Proxy Server
proxy1_address: YOURCOMPANYNAME.hosted.surevoip.co.uk ; See details provided
proxy2_address: YOURCOMPANYNAME.hosted.surevoip.co.uk
proxy3_address: "host.domain.tld"
proxy4_address: "host.domain.tld"
proxy5_address: "host.domain.tld"
proxy6_address: "host.domain.tld"
# Line 1 Settings
line1_name: "1000" ; Line 1 Extension\User ID - ie your extension number
line1_displayname: "User Name" ; Line 1 Display Name - ie your real name
line1_authname: "1000" ; Line 1 Registration Authentication - your authentication name (extension)
line1_password: "YourPASSWORDprovided123" ; Line 1 Registration Password
# Line 2 Settings
line2_name: "1000" ; Line 2 Extension\User ID
line2_displayname: "1000" ; Line 2 Display Name
line2_authname: "1000" ; Line 2 Registration Authentication
line2_password: "YourPASSWORDprovided123" ; Line 2 Registration Password
# Line 3 Settings
line3_name: "7012" ; Line 3 Extension\User ID
line3_displayname: "7012" ; Line 3 Display Name
line3_authname: "7012" ; Line 3 Registration Authentication
line3_password: "mysecret" ; Line 3 Registration Password
# Line 4 Settings
line4_name: "7013" ; Line 3 Extension\User ID
line4_displayname: "7013" ; Line 3 Display Name
line4_authname: "7013" ; Line 3 Registration Authentication
line4_password: "mysecret" ; Line 3 Registration Password
# Line 5 Settings
line5_name: "7014" ; Line 3 Extension\User ID
line5_displayname: "7014" ; Line 3 Display Name
line5_authname: "7014" ; Line 3 Registration Authentication
line5_password: "mysecret" ; Line 3 Registration Password
# Line 6 Settings
line6_name: "7015" ; Line 3 Extension\User ID
line6_displayname: "7015" ; Line 3 Display Name
line6_authname: "7015" ; Line 3 Registration Authentication
line6_password: "mysecret" ; Line 3 Registration Password
# Emergency Proxy info
proxy_emergency: ""
proxy_emergency_port: "5060"
# Backup Proxy info
proxy_backup: ""
proxy_backup_port: "5060"
# Outbound Proxy info
outbound_proxy: ""
outbound_proxy_port: "5060"
# NAT/Firewall Traversal
nat_enable: "1"
nat_address: ""
voip_control_port: "5060"
start_media_port: "16384"
end_media_port: "32766"
nat_received_processing: "0"
# Phone Label (Text desired to be displayed in upper right corner)
phone_label: "FreeSwitch" ; Has no effect on SIP messaging
# Time Zone phone will reside in
time_zone: GMT
# Telnet Level (enable or disable the ability to telnet into this phone
telnet_level: "2" ; 0-Disabled (default), 1-Enabled, 2-Privileged
# Phone prompt/password for telnet/console session
phone_prompt: "C7960" ; Telnet/Console Prompt
phone_password: "myphonesecret" ; Telnet/Console Password
# Enable_VAD (1-enabled, 0-disabled)
enable_vad: "0"
# Network Media Type (auto, full100, full10, half100, half10)
network_media_type: "auto"
user_info: phone
# URL for external Directory location
#logo_url: "" ; URL for branding logo to be used on phone display
# SIP Configuration Generic File (stop)
# Insert Extension for voice mail retrieval here, this is what's dialed when they hit the "envelope" key on the phone.
messages_uri: ""
# This is a bitmap, and it's supposed to set line 6 for auto-answer.
#However it seems that the newer versions won't allow anything above line4 to be set to auto-answer via tftp.
auto_answer: 32
autocomplete: 0
dnd_control: 2