{{tag>Setup Yealink Yealink_T18P Configuration Legacy}}
====== Yealink T18P======
This guide explains how to obtain the IP address on the Yealink T18P as it has no display to easily display it.

Configuration of the SIP accounts is otherwise the same as the [[Yealink|Yealink T2]] range IP phones.

====== Obtaining IP Address ======
To obtain the IP address, simply dial **%%**90#%%** (asterisk-asterisk-nine-zero-hash). The IP address will be played back to you.

===== To Enable or Disable DHCP =====
If you do no have an IP address automatically obtained, but you have a DHCP server running on your network, dial **%%**88#%%** then **1#** to enable DHCP.

To disable DHCP, dial **%%**88#%%** then **0#**

===== Static IP Address =====
In the case where you do not have  a DHCP server, or prefer to manually set an IP address, dial **%%**80#%%**.

Enter the IP address for the device, using **%%*%%** (asterisk) in place of **.** (period), followed by **%%#%%**.\\ //For example, to set 192.168.3.4 you will need to type in **192*168*3*4#**//

Subnet Mask: **%%**81#%%** - followed by hash. For example: //**255*255*255*0#**//.

Gateway **%%**82#%%** - followed by hash. For example: //**192*168*3*1#**//.

DNS1 **%%**83#%%** - followed by hash. For example: //**192*168*5*93#**//.

You can check these settings by dialling:

  * %%**90#%% for IP address
  * %%**91#%% for Subnet Mask
  * %%**92#%% for Gateway
  * %%**93#%% for DNS 1
  * %%**94#%% for DNS 2

====== Setting up the Yealink T18P with SureVoIP ======
Please refer to [[yealink]] to configure the SIP accounts on your Yealink T18P handset.

====== Further Reading ======
The Yealink T18P is end of life and official technical documentation is no longer available. Please contact us for upgrade options.