{{tag>Setup Yealink Yealink_W5_Series Yealink_W52P Yealink_W52H DECT Cordless Configuration}}
====== How to Set Up the Yealink W52P IP DECT Handsets======
This guide explains how to set up the **Yealink W52P** handsets to connect to SureVoIP.
These instructions apply to:
  * Yealink W52P
  * Yealink W52H (additional DECT handset)

If you have purchased the your Yealink handset from us directly then your handset will be automatically provisioned and no manual configuration will be required. See [[http://www.surevoip.co.uk/store/brand/yealink|our store]] for our handsets we can supply.

See the [[http://www.yealink.co.uk/|Yealink official website]] for further information on the Yealink handsets.

===== Configuration =====
You will need your Welcome Pack to hand as it contains your credentials
  - In your web browser, type in the IP address of your DECT base station.\\ //To find out the IP address, press **OK** then select **Status** and press **OK** then select **Base** and press **OK**. Note the **IP**\\ Default username is **admin** and default password is **SUREVOIP** followed immediately by the last 6 digits of the MAC address in upper-case.//
  - Click on the **Account** tab.
  - Select **Account 1**\\ //Or another unused account if Account 1 is already used. Note which account you use.//
      * **Account Active** should be **On**
      * **Label** should be **SureVoIP**
      * **Display Name** should be **SureVoIP** or your own name. This will display on your telephone phone screen when idle.
      * **Register Name** will be your //SIP Username/Auth ID// - this will be listed in your Welcome Pack
      * **User Name** will be your //SIP Username/Auth ID// - this will be listed in your Welcome Pack
      * **Password** will be your //SIP Password(Secret)// - this will be listed in your Welcome Pack
      * **SIP Server** will be your //SIP Registrar// and **Port** should be **5060** - this will be listed in your Welcome Pack
      * **Transport** should be **UDP**.
      * **Voice Mail** should be **%%*97%%**
      * **NAT Traversal** should be **Disabled**
  - Click **Confirm** at the bottom of the page.
  - Click the **Phone** tab at the top. Then select the **Tones** section.
  - Select **Great Britain** under **Select Country**.\\ //Of course, if you are not in the UK, select which country you are in!//
  - At the bottom, click **Confirm**.
  - Once rebooted, test making a call.