This guide explains how to set up BLF, or Busy Lamp Field on the following handsets:

• Yealink T26P
• Yealink T28P

1. In your web browser, type in the IP address of your handset.
   To find out the IP address, press Menu then 1. Status and 1. IP is the IP address.
   Default username is admin and default password is SUREVOIP followed immediately by the last 6 digits of the MAC address in upper-case.
2. Click on DSSKey tab along the top
3. Click on Memory Key on the left menu
4. Fill out the required fields with the relevant extensions you wish to monitor
   • Keys Memory 1 to Memory 10 correspond to the BLF buttons on your handset, from top to bottom
   • Set Type to BLF
   • Set Value to the extension you wish to monitor
   • Set Line to Line 1
     If your account is on a different Line then select the relevant Line
   • Set Extension to **
     This is the remote call pick-up prefix
5. Click Confirm to save and apply

When configured, the LEDs should light up accordingly.

• Solid Green means extension is available. Press BLF key to dial extension.
• Solid Red means the extension is on a call
• Blinking red means the extension is receiving a phone call. Press BLF key to perform pick-up.