How to Set Up the Cisco Unified IP Phone 7900 Series
This guide is relevant to the Cisco 7940 and Cisco 7960 Series IP Phones.
Please note: We are unable to provide support for these phones. If you require assistance please contact your supplier for support.
Use of the example configuration files below is entirely at your own risk.
If you use the below examples, please be sure to modify the usernames, passwords, proxy names etc as appropriate.
You will need to put these into a TFTP server ,and enable “Option 66” or TFTP Address on DHCP for this to succeed.
SIPDefault.cnf
- SIPDefault.cnf
# SIP Default Generic Configuration File # Image Version image_version: P0S3-08-11-00 # Proxy Server proxy1_address: YOURCOMPANYNAME.hosted.surevoip.co.uk ; See details provided to you on signup proxy2_address: YOURCOMPANYNAME.hosted.surevoip.co.uk ; Can be dotted IP or FQDN proxy3_address: "" ; Can be dotted IP or FQDN proxy4_address: "" ; Can be dotted IP or FQDN proxy5_address: "" ; Can be dotted IP or FQDN proxy6_address: "" ; Can be dotted IP or FQDN # Proxy Server Port (default - 5060) proxy1_port: 5060 proxy2_port: 5060 proxy3_port: 5060 proxy4_port: 5060 proxy5_port: 5060 proxy6_port: 5060 # Proxy Registration (0-disable (default), 1-enable) proxy_register: 1 # Phone Registration Expiration [1-3932100 sec] (Default - 3600) timer_register_expires: 3600 # Codec for media stream (g711ulaw (default), g711alaw, g729a) preferred_codec: g711alaw # TOS bits in media stream [0-5] (Default - 5) tos_media: 5 # Inband DTMF Settings (0-disable, 1-enable (default)) dtmf_inband: 0 # Out of band DTMF Settings (none-disable, avt-avt enable (default), avt_always - always avt ) dtmf_outofband: avt_always # DTMF dB Level Settings (1-6dB down, 2-3db down, 3-nominal (default), 4-3db up, 5-6dB up) dtmf_db_level: 3 # SIP Timers timer_t1: 500 ; Default 500 msec timer_t2: 4000 ; Default 4 sec sip_retx: 10 ; Default 10 sip_invite_retx: 6 ; Default 6 timer_invite_expires: 180 ; Default 180 sec ####### New Parameters added in Release 2.0 ####### # Dialplan template (.xml format file relative to the TFTP root directory) dial_template: dialplan # TFTP Phone Specific Configuration File Directory tftp_cfg_dir: "" ; Example: ./sip_phone/ # Time Server (There are multiple values and configurations refer to Admin Guide for Specifics) sntp_server: "0.uk.ntp.org" ; SNTP Server IP Address sntp_mode: unicast ; unicast, multicast, anycast, or directedbroadcast (default) time_zone: GMT ; Time Zone Phone is in dst_offset: 01/00 ; Offset from Phone's time when DST is in effect dst_start_month: March ; Month in which DST starts dst_start_day: 0 ; Day of month in which DST starts dst_start_day_of_week: Sunday ; Day of week in which DST starts dst_start_week_of_month: 8 ; Week of month in which DST starts dst_start_time: 02/00 ; Time of day in which DST starts dst_stop_month: October ; Month in which DST stops dst_stop_day: 0 ; Day of month in which DST stops dst_stop_day_of_week: Sunday ; Day of week in which DST stops dst_stop_week_of_month: 8 ; Week of month in which DST stops 8=last week of month dst_stop_time: 02/00 ; Time of day in which DST stops dst_auto_adjust: 1 ; Enable(1-Default)/Disable(0) DST automatic adjustment time_format_24hr: 1 ; Enable(1 - 24Hr Default)/Disable(0 - 12Hr) date_format: M/D/Y # Do Not Disturb Control (0-off, 1-on, 2-off with no user control, 3-on with no user control) dnd_control: 2 ; Default 0 (Do Not Disturb feature is off) # Caller ID Blocking (0-disbaled, 1-enabled, 2-disabled no user control, 3-enabled no user control) callerid_blocking: 0 ; Default 0 (Disable sending all calls as anonymous) # Anonymous Call Blocking (0-disabled, 1-enabled, 2-disabled no user control, 3-enabled no user control) anonymous_call_block: 0 ; Default 0 (Disable blocking of anonymous calls) # DTMF AVT Payload (Dynamic payload range for AVT tones - 96-127) dtmf_avt_payload: 101 ; Default 101 # Sync value of the phone used for remote reset sync: 1 ; Default 1 ####### New Parameters added in Release 2.1 ####### # Backup Proxy Support proxy_backup: "" ; Dotted IP of Backup Proxy proxy_backup_port: 5060 ; Backup Proxy port (default is 5060) # Emergency Proxy Support proxy_emergency: "" ; Dotted IP of Emergency Proxy proxy_emergency_port: 5060 ; Emergency Proxy port (default is 5060) # Configurable VAD option enable_vad: 0 ; VAD setting 0-disable (Default), 1-enable ####### New Parameters added in Release 2.2 ###### # NAT/Firewall Traversal nat_enable: 0 ; 0-Disabled (default), 1-Enabled nat_address: "" ; WAN IP address of NAT box (dotted IP or DNS A record only) voip_control_port: 5060 ; UDP port used for SIP messages (default - 5060) start_media_port: 16384 ; Start RTP range for media (default - 16384) end_media_port: 32766 ; End RTP range for media (default - 32766) nat_received_processing: 0 ; 0-Disabled (default), 1-Enabled # Outbound Proxy Support outbound_proxy: "" ; restricted to dotted IP or DNS A record only outbound_proxy_port: 5060 ; default is 5060 ####### New Parameter added in Release 3.0 ####### # Allow for the bridge on a 3way call to join remaining parties upon hangup cnf_join_enable : 0 ; 0-Disabled, 1-Enabled (default) ####### New Parameters added in Release 3.1 ####### # Allow Transfer to be completed while target phone is still ringing semi_attended_transfer: 1 ; 0-Disabled, 1-Enabled (default) # Telnet Level (enable or disable the ability to telnet into the phone) telnet_level: 0 ; 0-Disabled (default), 1-Enabled, 2-Privileged ####### New Parameters added in Release 4.0 ####### # XML URLs services_url: "" ; URL for external Phone Services directory_url: "http://kjv.homeip.net/cisco/dir.xml" ; URL for external Directory location logo_url: "" ; URL for branding logo to be used on phone display # HTTP Proxy Support http_proxy_addr: "" ; Address of HTTP Proxy server http_proxy_port: 80 ; Port of HTTP Proxy Server (80-default) # Dynamic DNS/TFTP Support dyn_dns_addr_1: "" ; restricted to dotted IP dyn_dns_addr_2: "" ; restricted to dotted IP dyn_tftp_addr: "" ; restricted to dotted IP # Remote Party ID remote_party_id: 1 ; 0-Disabled (default), 1-Enabled ####### New Parameters added in Release 4.4 ####### # Call Hold Ringback (0-disabled, 1-enabled, 2-disabled no user control, 3-enabled no user control) call_hold_ringback: 3 ; Default 0 (Disable ringback of held call) auto_answer: 32 autocomplete: 0 dnd_control: 2
Rename the MAC file to your phone's MAC address. What is in the MAC file over-rides the SIPDefault file.
SIP00MAC.cnf
- SIP001122334455.cnf
# SIP Configuration Generic File (start) # Proxy Server proxy1_address: YOURCOMPANYNAME.hosted.surevoip.co.uk ; See details provided proxy2_address: YOURCOMPANYNAME.hosted.surevoip.co.uk proxy3_address: "host.domain.tld" proxy4_address: "host.domain.tld" proxy5_address: "host.domain.tld" proxy6_address: "host.domain.tld" # Line 1 Settings line1_name: "1000" ; Line 1 Extension\User ID - ie your extension number line1_displayname: "User Name" ; Line 1 Display Name - ie your real name line1_authname: "1000" ; Line 1 Registration Authentication - your authentication name (extension) line1_password: "YourPASSWORDprovided123" ; Line 1 Registration Password # Line 2 Settings line2_name: "1000" ; Line 2 Extension\User ID line2_displayname: "1000" ; Line 2 Display Name line2_authname: "1000" ; Line 2 Registration Authentication line2_password: "YourPASSWORDprovided123" ; Line 2 Registration Password # Line 3 Settings line3_name: "7012" ; Line 3 Extension\User ID line3_displayname: "7012" ; Line 3 Display Name line3_authname: "7012" ; Line 3 Registration Authentication line3_password: "mysecret" ; Line 3 Registration Password # Line 4 Settings line4_name: "7013" ; Line 3 Extension\User ID line4_displayname: "7013" ; Line 3 Display Name line4_authname: "7013" ; Line 3 Registration Authentication line4_password: "mysecret" ; Line 3 Registration Password # Line 5 Settings line5_name: "7014" ; Line 3 Extension\User ID line5_displayname: "7014" ; Line 3 Display Name line5_authname: "7014" ; Line 3 Registration Authentication line5_password: "mysecret" ; Line 3 Registration Password # Line 6 Settings line6_name: "7015" ; Line 3 Extension\User ID line6_displayname: "7015" ; Line 3 Display Name line6_authname: "7015" ; Line 3 Registration Authentication line6_password: "mysecret" ; Line 3 Registration Password # Emergency Proxy info proxy_emergency: "" proxy_emergency_port: "5060" # Backup Proxy info proxy_backup: "" proxy_backup_port: "5060" # Outbound Proxy info outbound_proxy: "" outbound_proxy_port: "5060" # NAT/Firewall Traversal nat_enable: "1" nat_address: "" voip_control_port: "5060" start_media_port: "16384" end_media_port: "32766" nat_received_processing: "0" # Phone Label (Text desired to be displayed in upper right corner) phone_label: "FreeSwitch" ; Has no effect on SIP messaging # Time Zone phone will reside in time_zone: GMT # Telnet Level (enable or disable the ability to telnet into this phone telnet_level: "2" ; 0-Disabled (default), 1-Enabled, 2-Privileged # Phone prompt/password for telnet/console session phone_prompt: "C7960" ; Telnet/Console Prompt phone_password: "myphonesecret" ; Telnet/Console Password # Enable_VAD (1-enabled, 0-disabled) enable_vad: "0" # Network Media Type (auto, full100, full10, half100, half10) network_media_type: "auto" user_info: phone # URL for external Directory location #logo_url: "" ; URL for branding logo to be used on phone display # SIP Configuration Generic File (stop) # Insert Extension for voice mail retrieval here, this is what's dialed when they hit the "envelope" key on the phone. messages_uri: "" # This is a bitmap, and it's supposed to set line 6 for auto-answer. #However it seems that the newer versions won't allow anything above line4 to be set to auto-answer via tftp. auto_answer: 32 autocomplete: 0 dnd_control: 2