The Grandstream GXP2160 is an enterprise SIP telephone with support for up to four lines, dual ethernet ports and can be configured through the built in web configuration page.

This guide has been written for the Grandstream GXP2160 but should also apply for similar models.

This guide will apply for the following handsets:

• Grandstream GXP2130 v2
• Grandstream GXP2135
• Grandstream GXP2140
• Grandstream GXP2160
• Grandstream GXP2170

See the Grandstream GXP2160 product page for more info.

1. Once the phone has powered up, press the menu button and go to Status then Network Status.
   The Menu button is the button in the centre of the arrow keys.
   
   The default username and password is admin if it has not already been changed.
   
   
2. Now go to the Account 1 General settings.
   
   
3. Fill out your provided SIP details as below.
   Your details can be found in your Welcome Pack.

If the phone will not register, check over the account info page for anything that may be mistyped.

Ensure that:

• Account Active is set to Yes
• SIP Settings → Basic Settings → SIP Registration is set to Yes
• SIP Settings → Basic Settings → SIP Transport is set to UDP
• SIP Settings → Session Timer → Caller Request Timer is set to Off
• SIP Settings → Session Timer → Callee Request Timer is set to Off
• SIP Settings → Session Timer → Force Timer is set to Off
• Audio Settings → Send DTMF is set to via RTP (RFC2833)
• Audio Settings → Preferred Vocoder - choice 1 is set to G.722(wide band)
• Audio Settings → Preferred Vocoder - choice 2 is set to PCMA

Ensure SIP ALG is disabled on your router. See this page for further information.

Your firewall is not preventing your phone from reaching the internet. Please refer to the NAT and Firewall settings page.

Please be aware that we do not support this model so will be unable to offer assistance. Please contact your supplier for further assistance if required.